Memory Seats - Cadillac XTS Owner's Manual

Memory Seats

Driver Buttons Shown, Passenger
Buttons Similar
If equipped, the SET, 1, 2, and
(Exit) buttons on the driver door and
front passenger door are used to
manually store and recall memory
settings for the driver and passenger
seats. The driver memory buttons also
store outside mirror, power tilt and
telescoping steering column positions,
and massage, if equipped.
Storing Memory Positions
To store positions to the 1 and 2
buttons:
1. The ignition must be in ON/
RUN/START or ACC/ACCESSORY.
2. Adjust the driver seat, power tilt
and telescoping steering column,
if equipped, massage type and
intensity, if equipped, and the
outside mirrors on some vehicles.
3. Press and release SET. A beep
will sound.
4. Immediately press and hold 1
until two beeps sound.
5. Repeat Steps 1 4 for a second
driver using 2.
To store exit positions and easy exit
features to the (Exit) button,
repeat Steps 1 4 using
your positions for getting out of the
vehicle.
SEATS AND RESTRAINTS
Manually Recalling Memory
Positions
Press and hold 1, 2, or
manually recall the previously stored
memory positions. Releasing 1, 2,
or before the stored positions are
reached stops the recall.
If the massage feature is off when the
memory recall is performed, the
previously stored type and intensity
will be recalled, but it will remain off
until activated with the On/Off control
or through the center stack with the
uplevel seat controls.
Automatically Recalling Memory
Positions (Auto Memory Recall)
(Driver Only)
If programmed in the vehicle
personalization Menu, the Auto
(Automatic) Memory Recall feature
to store
automatically recalls the current
driver s previously stored 1 or 2
position when the ignition is changed
from OFF to ON/RUN/START or ACC/
ACCESSORY.
See Auto Memory Recall under
Comfort and Convenience in Vehicle
Personalization 0 144.
57
to