Lighting
Exterior Lighting
Changer . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Lamps (DRL) . . . . . . . . . . . . . . . . . . . . 153
Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Control . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Dome Lamps . . . . . . . . . . . . . . . . . . . . . 155
Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Exterior Lighting
Exterior Lamp Controls
The exterior lamp control is on the
turn signal lever.
Turn the control to the following
positions:
: Turns off the exterior lamps. The
knob returns to the AUTO position
after it is released. Turn to
reactivate the AUTO mode.
AUTO : Automatically turns the
exterior lamps on and off, depending
on outside lighting.
: Turns on the parking lamps
including all lamps, except the
headlamps.
: Turns on the headlamps together
with the parking lamps and
instrument panel lights.
IntelliBeam
If equipped, this system turns the
vehicle's high-beam headlamps on and
off according to surrounding traffic
conditions.
The system turns the high-beam
headlamps on when it is dark enough
and there is no other traffic present.
This light comes on in the instrument
again to
cluster when the IntelliBeam system
is enabled.
Turning On and Enabling IntelliBeam
To enable the automatic high-beam
system, with the turn signal/lane
change lever in the neutral position,
turn the exterior lamp control to
LIGHTING
151
®
System