Auxiliary Function; Warning Indicators; Time Delay; Cancelling The Time Delay - Beko DCU 7230 User Manual

Operating the product

6.7 Auxiliary function

Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end. If you do
not want to hear the audio warning, press
"Cancel Audio Warning" button. The relevant
light will turn on when this button is pressed
and an audio warning will not be given when
the programme comes to an end.
C
You can select this function either
before or after the programme
starts.

6.8 Warning indicators

C
Warning indicators may differ
according to the model of your
dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning light
lights up continuously, please
refer to, "Suggested solutions for
problems".
Water tank
Warning light starts flashing when the
tank is filled with water. The dryer stops
operating if the warning light turns on when
a programme is running. Drain the water in
the water tank to restart the dryer. Press
"Start/Pause/Cancel" button to start the
programme after you have emptied the
water tank. The warning light turns off and
the programme resumes operating.

6.9 Time delay

If you wish to dry your clothes at a later time,
thanks to the time delay function, you can
delay the programme start up to 3 hours, 6
hours or 9 hours.
1. Open the loading door and put the laundry
in.
C
Make sure that all air outlets are
open, door filter is cleaned and
the water tank is empty.
2. Set the drying programme and, if
required, the auxiliary functions.
Dryer / User Manual
3. When the time programming button is
pressed once, a 3 hour delay is selected
and the relevant led lights. When the
same button is pressed again, 6 hours;
and if pressed once more, 9 hours delay
will be selected. If the time programming
button is pressed one more time, time
delaying function will be cancelled. Set
the time delay as you require.
4. Delayed operation of the selected
programme is started by pressing the
"Start/Pause/Cancel" button after
selecting the time delay.
C
Additional laundry may be loaded
/ taken out during the time delay
period.
C
During the time delay period,
laundry is rotated for 4 seconds
in every 10 minutes to prevent
creasing.
6.10 Canceling the time delay
If you want to cancel the time delay
countdown and start the programme:
1. Press "Start/Pause/Cancel" button for
about 3 seconds.
2. Press "Start/Pause/Cancel" button to
start the programme right away.

6.11 Starting the programme

1. Press "Start/Pause/Cancel" button to
start the programme.
2. Light of the "Start/Pause/Cancel"
button will turn on to indicate that the
programme has started.
23 / EN