Maintenance And Cleaning; Cleaning Lint Filter / Loading Door Inner Surface - Beko DCU 7230 User Manual

7

Maintenance and cleaning

Service life of product extends and frequently
experienced problems will be reduced if it is
cleaned at regular intervals.
7.1 Cleaning Lint Filter /
Loading Door Inner Surface
Lint and fibre released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
C
Such fibre and lint are generally
formed during wearing and
washing.
A
Always clean the lint filter and the
inner surfaces of the loading door
after each drying process.
C
You can clean the lint filter housing
with a vacuum cleaner.
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it up and
open the lint filter.
• Clean lint, fibre, and cotton raveling by
hand or with a soft piece of cloth.
• Close the lint filter and place it back into
its housing.
• A layer can build up on the filter pores
that can cause clogging of the filter after
using the dryer for a while. Wash the
lint filter with warm water to remove
the layer that builds up on the lint filter
surface. Dry the lint filter completely
before reinstalling it.
Dryer / User Manual
• Clean the entire inner surface of the
loading door and loading door gasket with
a soft damp cloth.
27 / EN