Auxiliary Function; Warning Indicators; Starting The Programme; Progress Of Programme - Beko DV 1562 X User Manual

Auxiliary function

Cancel Audio Warning
Your machine will send out an audio
warning when the programme comes to
an end. If you do not want to hear this
buzzing, you need to press the "Cancel
Audio Warning" button. The relevant LED
will light up when this button is pressed
and an audio warning will not be given
when the programme comes to an end.
C
You can select this function either
before or after the programme starts.

Warning indicators

C
Warning indicators may differ
according to the model of your
machine.
Filter cleaning
A
warning LED will light up to remind
filter cleaning after the programme
finishes.
C
If the filter cleaning warning LED
lights up continuously, please refer to,
"Solution suggestions for problems".

Starting the Programme

1. Press "Start/Pause/Cancel" button to
start the programme.
2. "Start/Pause/Cancel" button will light
up to indicate that the programme has
started.

Progress of programme

Progress of a running programme is
shown through the programme follow-
up indicator.
At the beginning of every programme
step, the relevant indicator LED will
light up and light of the completed step
will turn off.
"Drying":
- Drying level will be illuminated during
the whole drying process until the drying
degree reaches " Ready to Iron ".
" Ready to Iron ":
- Starts to illuminate when the drying
degree reaches " Ready to Iron " step
and remains illuminated until the next
step.
" Ready to Wear ":
- Starts to illuminate when the drying
degree reaches " Ready to wear " step
and remains illuminated until the next
step.
"Final / Anti-creasing":
- Illuminates when the programme comes
to an end and anti-creasing function is
activated.
C
If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
Changing the programme after
the programme has started
You can use this feature after your
machine has started to dry your clothes
under higher or lower temperatures.
For example;
Press and hold the "Start/Pause/Cancel"
button for about 3 seconds to "Cancel"
the programme in order to select "Extra
Dry" programme instead of "Iron Dry"
programme.
Select the "Extra Dry" programme by
rotating the programe knob.
Press "Start/Pause/Cancel" button to
start the programme.
C
The programme which is selected
first will go on even if the programme
selection button is moved and another
programme mode is selected while
the machine is operating. You must
cancel the ongoing programe in order
to change the drying programme.
(See, Ending the programme through
canceling)
Adding/removing laundry in
standby mode
In order to add or take out laundry after
the start-up of the programme;
1. Press the "Start/Pause/Cancel" button
to switch the machine to "Pause"
mode. Drying process will stop.
2. Open the door at Pause position and
close it again after adding or taking out
laundry.
3. Press "Start/Pause/Cancel" button to
start the programme.
C
Any laundry added after the drying
process was started may cause the
already dried clothes in the machine
intermingle with wet clothes and the
result will be wet laundry after the
drying process is over.
15 - EN