HUSTLER FasTrak Operator's Manual page 44

SYMPTOMS PROBABLE CAUSES
Uneven cutting height The blade(s) are not sharp
A cutting blade(s) is/are
bent
The deck is not level
An anti-scalp wheel is not
set correctly
The underside of the deck
is dirty
Tires improperly inflated
A blade spindle mount is
bent
REV C
SUGGESTED
REMEDIES
Sharpen the blades
Install new cutting blade(s)
Level the deck per the Deck
leveling and height adjust-
ment section of the General
Service Manual
Adjust the height of the
anti-scalp wheel
Clean the underside of the
deck
Adjust air pressure to 55–
83 KPa
Contact your Dealer
5-2 605596CE