Dell OPTIPLEX E1 Reference And Installation Manual page 130

7DEOH % &RQILJXUDWLRQ 8WLOLW\ 0HVVDJHV
0HVVDJH
The ICU detects a
resource conflict
between this card
and
conflicting_card .
The conflicting
resource was:
resource .
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User's Guide .
B-4 Dell OptiPlex E1 Mini Tower Managed PC Reference and Installation Guide
FRQWLQXHG
3UREDEOH &DXVH
You added or modified a
card that now requires a
resource value already
in use by
conflicting_card .
&RUUHFWLYH $FWLRQ
Try each of the following options until the problem
is resolved:
‡
Modify the card you are adding so that it uses
a different value for resource . See "Modify-
ing a Card" in Chapter 3 for instructions.
‡
Modify conflicting_card so that it uses a
different value for resource . See "Modifying
a Card" in Chapter 3 for instructions.
‡
If conflicting_card is not the system
board, remove it from the computer. See
"Removing a Card" in Chapter 3 for
instructions.
‡
Remove all expansion cards from the ICU, and
then add them back one at a time, beginning
with the new card and resolving resource con-
flicts as they arise. See "Removing a Card"
and "Adding a Listed Card" or "Adding an
Unlisted Card" in Chapter 3 for instructions.
‡
If you cannot resolve the resource conflict by
any of the preceding methods, remove the
new card. If you were modifying an existing
card, reset the modified card to its previous
resource value.