Front Panel - Strymon sunset User Manual

Sunset
- Dual Overdrive

Front Panel

• A
Toggles between 3 different
Drive circuits for the A effect.
Ge - A circuit combining
the softer response of
Germanium diodes with a
parallel path that blends in
the dry signal as the Drive is
lowered. At higher gains the
lower-mid-range frequencies
are emphasized to create a
tight, thick response.
texas - A single stage soft-
clipper configuration that
is filtered before and after
the gain stage to create
a smooth and dynamic
overdrive. Perfect for playing
the blues or just fattening up
your sound with a signature
mid-range bump.
treble - A clean boost that
removes the low frequencies
as the Tone knob is turned
up. Great for tightening up
an overdriven amp, or driving
another gain pedal that's a
bit looser on the low end.
• B
Toggles between 3 different
Drive circuits for the B effect.
2stage - The 2stage
overdrive combines a soft-
clipping stage followed by a
hard-clipping stage, creating
a complex overdrive with a
wide range of gain. Its EQ
structure preserves the
low end while adding some
muscle to push your amp.
This overdrive can easily take
you from lightly clipped to
beefy saturation.
hard - A single-stage hard-
clipping circuit that has a ton
of gain on tap, approaching
fuzz territory with the Drive
knob maxed. At lower gains,
mildly clipped transparent
tones are achieved.
JFET - A clean boost that
subtly beefs up your signal
with the dynamics and
response of a JFET front
end. As you turn up the drive,
the signal gets rounded and
warmer.
®
pg 2