Turning On The Unit - Yamaha YAS-706 Series Owner's Manual

Turning on the unit

This section explains initial setup of the unit, performed when it is
turned on for the first time after purchase.
z
1
Press the z key to turn on the unit.
When the center unit is turned on, the center unit and
subwoofer are automatically connected via wireless
connection. Once the connection has been successfully
established, the STATUS indicator on the subwoofer glows as
shown in the illustration below, and the unit is ready for play
back.
NOTE
• If the STATUS indicator does not glow properly the first time the unit is
turned on, pair the center unit and subwoofer manually. See "Pairing the
center unit and subwoofer" (p. 62).
Wired connection
If there is no sound coming from the subwoofer, or if sound is
intermittent, due to the influence of radio waves from other
devices, connecting the center unit and subwoofer via cables will
solve the problem. Connect the center unit and subwoofer via an
RCA mono cable (not supplied) and a 3.5 mm monaural mini
plug cable (not supplied). A 3.5 mm monaural mini plug cable is
required to turn the center unit and subwoofer on and off at the
same time.
STATUS
STATUS
indicator
Glows green
SYSTEM
SUBWOOFER
CONNECTOR
OUT
To connect the center unit and subwoofer using a wired
connection, set "Bass Out" of "Subwoofer" in the setup menu to
"Wired" (p. 45).
When the center unit is turned on, the subwoofer turns on and its
STATUS indicator glows green.
NOTE
• Be sure the center unit is turned off before connecting the subwoofer.
• The subwoofer supplied with the unit can only be connected.
PREPARATION ➤ Turning on the unit
RCA mono cable
3.5 mm monaural mini
plug cable
SYSTEM INPUT
CONNECTOR
PAIRING SUBWOOFER STATUS CONNECTOR SYSTEM INPUT
15
En