Initializing The Unit - Yamaha YAS-706 Series Owner's Manual

Updating firmware with connection of a USB flash
drive
Download the latest firmware version from the Yamaha website to a USB flash drive,
which can then be used to update the unit's firmware.
See information provided when updating firmware for details.
1
Save this unit's firmware to a USB flash drive.
2
Turn off the unit.
3
Connect the USB flash drive to the UPDATE ONLY jack on the unit's
rear panel.
4
Hold down the key and press the
CONNECT
The firmware update begin.
Update progress can be confirmed using the indicators on the unit.
Update progress
If the update is completed successfully, all indicators on the unit will flash.
5
Press the key on the unit.
CONNECT
The firmware update is complete.
NOTE
• If the firmware update fails, the indicator at far right on the unit will flash blue. Press the
off and then on again, and repeat the procedure from step 1 again. If the firmware update fails again,
confirm the USB flash drive is correctly connected to the UPDATE ONLY jack.
key.
key to turn unit

Initializing the unit

Follow the procedure below to initialize the unit.
1
Turn off the unit.
2
Hold down the key and press the
indicators flash.
CONNECT
Initialized
key on the unit until all
SETTINGS ➤ Initializing the unit
53
En