Enable/Disable The Function That Turns Off The Unit Automatically; Display Audio Input Signal Information; Display Video Input Signal Information; Display This Unit's Firmware Version - Yamaha YAS-706 Series Owner's Manual

Auto Power Standby
➜
Setup Menu Function
Enabling the auto power standby function prevents the unit from remaining on when not
in use.
Settings
Off (default) Disable the auto power standby function.
Enable the auto
On power standby
function.
The auto power standby function can also be configured without using the setup
menu. Follow the procedure below.
1
Turn off the unit.
2
Hold down the key and press the
CONNECT
The auto power standby function is enabled or disabled, and the unit turns on. For several
seconds immediately after the unit is turned on, the indicator shows auto power standby
function status.
Off (enabled), glows (disabled)
➜
Auto Power Standby
The unit automatically turns off in any of the
following situations.
− No operations for 8 hours
− No audio input and no operations for 20
minutes when HDMI 1-2, BLUETOOTH or
NET is selected as the input source.
key on the unit.
Information
Display information for the audio and video signal input to this unit.
Audio
➜
Setup Menu Information
The following information on the current audio input signal is displayed.
Format Digital audio format
The number of channels contained within the input signal—front/
surround/low field effects (LFE).
Example: "3/2/0.1" means signal contains 3 front channels, 2
Number of channels
surround channels, and LFE.
If the signal contains channels other than front, surround, and LFE,
the total number of channels may be displayed. Example: "5.1ch"
Sampling frequency The sampling frequency of the digital input signal
Bit rate The per-second bit rate of the input signal
HINT
• The audio bit rate may not be displayed for some input signals.
Video
➜
Setup Menu Information
The following information on the current video input signal is displayed.
Type HDMI or DVI
Resolution Video signal resolution
System
➜
Setup Menu Information
Display the version of firmware currently installed on this unit.
➜
Audio
➜
Video
➜
System
SETTINGS ➤ Setup menu
En
50