Turning On And Off The Sound Bar - Yamaha TRUE X BAR 50A User Manual

PREPARATION > Turning on and off the sound bar

Turning on and off the sound bar

Turn this product on and off.
1
Press the z (Power) button on the remote control.
Pressing the button turns the product on and off.
When the sound bar is turned on, all the indicators on the front of the sound bar glow, and
then some indicators remain glowing to show the setting status (normal display).
When the sound bar is turned off, the indicators go off.
NOTE
After connecting the power, some of the indicators on the front of the sound bar flash for approximately one minute as follows, and
then turn off.
Make sure that the indicators on the front of the sound bar are turned off and the CONNECT indicator on the rear of the subwoofer is
glowing before turning on the sound bar.
Next steps (if needed)
Connecting the sound bar to a network:
(
"Network functions" (p.38)
(
"Connecting to a network using a network cable (wired connection)" (p.39)
(
"Connecting to a network wirelessly (wireless connection)" (p.40)
(
Connecting the WS-X3A/WS-X2A/WS-X1A wireless speakers (sold separately):
(
"Connecting wireless speakers" (p.42)
(
z (Power)
37