Setup; Lock - Tesla 6 SERIES Operating Instruction

ENG
Fine-Tune
Use to make small adjustments to tuning of an individual channel. Fine-tune is not necessary
under normal conditions. However, in area of inferior broadcast conditions where adjustments
is necessary for a better picture and sound, use fine-tune.
1. Select a channel that you want to fine tune.
2. In Channel menu, select ATV Manual Tuning and press to highlight Fine-Tune.
3. Press  or  to fine tune until the best possible picture and sound are obtained.

Setup

OSD Language: Select your desired OSD language.
Audio Language: Set the primary or secondary digital audio language corresponding to
the signal.
Subtitle Language: Select the subtitle language.
HBBTV (May not be available): Turn on or turn off this feature.
PVR File System: Personal Video Record setting. If you want to use this function, you
must receive a digital program and plug a USB disk.
Note: Suggest to use a high speed mobile hard disk, or your TV may get stuck when
using the PVR and time shift function.
Restore Default: Restore Menu options to the factory defaults.
Note: User data on this TV will lose completely after operating this feature.
Link: HDMI link setting.
Network Upgrade: Connect the TV to the internet and you can upgrade the TV system
and network applications.
Software Update (USB): Select to update Software from USB.
Sticker Demo: Turn sticker Demo On or Off.
HDMI EDID: Switch the version of EDID.
Location: Select the environment you use this TV, options include home and store. If
select "store", open the "Sticker Demo" and the TV will appear the function introduction
on the screen to help selling.
Note:
1. Audio Language and PVR File System only work under DTV source.
2. Do not power off the TV during the software upgrading process, otherwise the TV may not
work, and the customer should be responsible.
3. Network Upgrade and HBBTV may not be available for some regions, your actual TV
should govern.

lock

Lock System: Select On to enable the following three menu items.you will be prompted
to enter the password. The default password is 0000.
Set Password: Use to change the current Lock Password.
Block Program (Only in TV mode): Allows you to password restrict access to specific
channels.
Parental Guidance (Only in TV mode): Allows you to password restrict access to shows
programs based on their parental rating.
18