Equipment Setup; Installation - Tesla 32T320BH User Manual

INSTRUCTION
Accessories
1x safety instructions/warranty cards, 1x remote control, 2x AAA batteries
Equipment set-up
Fig.1 NOTE: The graphics are for representation only.
Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of at
least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any
objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
The symbols serve as follows:
WARNING
NOTE
MENU
Move to

INSTALLATION

Default PIN code: 0000
Front panel/underside
Fig.2 NOTE: The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
3. Combo button
Rear panel
Fig.3 NOTE: The graphics are for representation only.
1. AC INPUT (FIXED CABLE)
2. Vesa 100 x 100
Fig.3a NOTE: The graphics are for representation only.
button
1. Turn on the TV.
2. The TV is on, press it to display Button menu.
3. In the Button menu, short press it to select the menu, long press it to confirm the selection.
Indicates warning information.
Indicates any other additional important or helpful information.
Represents a button on the remote control or the TV. (Bold characters)
Represents a menu item within a window. (Italic characters)
Main power cable (180 – 240 V ~ 50/60 Hz)
4 x screws holes to mount TV to the wall
5
ENG