Mitsubishi A1SD75M3 User Manual page 582

13 COMMON FUNCTIONS
Setting item
Flash ROM write
Cd.9
request
* Refer to section "5.7 List of control data" for details on the setting details.
(3) Backing up the execution data
To use the "execution data backup function", set the data shown in the following
table, and write it to the AD75 using the sequence program.
The writing to the flash ROM is carried out when the data is written to the AD75.
Setting
value
1 Set "1" (flash ROM write request).
When the writing to the flash ROM is complete, "0" will be set in " Cd.9 Flash
ROM write request" by the AD75.
Setting details
13 - 6
MELSEC-A
Buffer memory address
Axis 1 Axis 2 Axis 3
1138