KN1000A User Manual
Power Management
The Power Management page has two tabs that allow you to configure the
Outlet Settings and Serial Console (COM 2) settings which let you set up
power management through the KN1000A.
To help you manage and control your entire data center environment, a built-
in single-port power switch allows remote power management of a server/
installation connected locally to the KN1000A. You can also add a PON
(Power Over the NET™) power management unit and remotely control the
power status of devices in your installation, as well as turning servers on and
off.
If you have the proper permission (See User Management, page 24), the Power
Management page will bring up the KN1000A's power control interface,
allowing you to reset power over the network, use the Wake on LAN feature,
schedule routines, and use the Auto Ping function. These are all detailed in the
sections that follow:
52