Furuno NAVpilot-700 Installation Instructions Manual page 7

Fuse replacement
The fuse in the fuse holder on the + line (red) of the cable assy. (MJ-A7SPF0005-020C) protects
the IPS interface unit from overcurrent and equipment fault. If you can not turn on the power, check
if the fuse has blown. If the fuse has blown, find the reason before you replace the fuse. If the fuse
blows again after the replacement, contact your dealer for advice.
3. Gateway Unit
Install the unit with two self-tapping screws.
For details of the installation and wiring, see the installation manual of the gateway unit.
#: Minimum service clearance.
WARNING
Use the proper fuse.
Use of a wrong fuse can result in fire and
damage the equipment.
Name
Fuse FGMB 125V 1A PBF 000-157-478-10
#60
Type Code No.
7
130
116
Unit mm
#20