Custom Screen; How To Customize The Screen - Furuno RD-33 Operator's Manual

3.

CUSTOM SCREEN

You can arrange the data to display and show the data in the order desired. Availability
of data depends on the sensors connected.
3.1

How to Customize the Screen

1. Press the MENU key to open the menu.
2. Use the Cursorpad (
3. Use the Cursorpad (
ENT key.
4. Use the Cursorpad (
No-split
Horizontal
two-way split
Horizontal/vertical
three-way split 1
Four-way split
Six-way split
or ) to select [Display] and press the ENT key.
or ) to select [Display1 (2, 3, 4, 5, 6 or 7)] and press the
or ) to select [Custom Layout] and press the ENT key.
Vertical
two-way split
Horizontal/vertical
three-way split 2
Horizontal/vertical
three-way split 3
3-1