9.4
Adjustments
After you install the remote display, initialize the remote display as follows:
1. Press the
2. Press the ENT key with the cursor on [English]. The menu for units of measure-
ment appears.
3. Use the Cursorpad (
key.
Temperature
*: Set the difference between UTC (Universal time coordinated)
and local time.
4. Use the Cursorpad (
5. Press the MENU key to close the menu.
key to turn on the power.
or
Depth
Speed
Fuel
or
) to select the menu item desired and press the ENT
Distance
Engine Pressure
) to select an option and press the ENT key.
9. INSTALLATION
Wind Speed
Time Offset*
9-7