Emergency Stop / Reset Operation - Toshiba VF-PS1 Instruction Manual

1. Press the [F4] key to carry out jog run.
The jog run frequency is displayed on the screen.
(In this example, the operation frequency is set at 5.0Hz.)
Operation continues as long as the [F4] key is pressed,
and it stops when the [F4] key is released.
Functions of function keys
F1
: Switches between Quick mode and Standard Setting mode.
F2
: Goes to the Language selection window.
F4 : Executes a jog run command.

3.3.5 Emergency stop / reset operation

To make an emergency stop or to reset the inverter, follow these steps. An emergency stop can be made when
operation is performed with the terminal board inputs (parameter CMOd=0, 2, 3 or 4).
3
1. Press the [STOP/RESET] key.
Blinking code "
of the window.
2. Then press the [STOP/RESET] key again.
The Emergency Stop window appears and the blinking code
"E" is displayed.
3. Then press the [STOP/RESET] key again.
The Trip window appears and the blinking code "CLr" is
displayed.
4. Last of all, press the [STOP/RESET] key once again to reset the inverter.
EOFF " is displayed in the upper right corner
FWD 60.0 Hz
Quick
F1
FWD 60.0 Hz
Quick
FWD 60.0 Hz
Quick
FWD 60.0 Hz
Quick
C-6
E6581429
Top View Mode
JOG
5.0
Hz
Lng JOG
F2 F4
Top View Mode EOFF
RUN
60.0
Hz
Emergency stop?
Lng ---
Top View Mode
Trip
E
Emergency stop
Lng ---
Top View Mode
Trip
CLr
Trip reset? (STOP-Key)
Lng ---