Selecting A Language To Be Displayed; Performing Jog Run - Toshiba VF-PS1 Instruction Manual

(2) Local / Remote key function
• "Loc/ Rem " is displayed. ([F1] key is in OFF State)
In this state, remote controlled operation via terminal board is available.
• If the [F1] key is pressed while "Loc/
In this state, local operation with operation panel is available.
There is no need to switch to local operation mode by changing parameter settings.
* [F1] key is not active while the drive is operating.
(3) Monitor peak / minimum hold trigger function
• "Update" is displayed. ([F1] key is in OFF State)
In this case, the instant the [F1] key is pressed a measurement for peak / minimum hold starts. While the [F1]
key is pressed, highlighted "

3.3.3 Selecting a language to be displayed

A language to be displayed on the screen can be selected between Japanese and English.
In this window, the language selected at the first power on can also be changed to the other language.
1. Press the [F2] (Lng) key.
The Language selection window appears on the screen.
The language selected is highlighted and marked with a
checkmark.
Functions of function keys
: Goes to the Top View Mode.
F1
2. Select/confirm the desired language with the control dial.
(In this example, Japanese is selected.)
Functions of function keys
: Goes to the Top View Mode.
F1

3.3.4 Performing jog run

When Panel Jog Run is selected (parameter F262=1, CMOd=1), "JOG" is displayed in the lower right corner of the
window. When "JOG" is displayed, jog run can be performed using the [F4] key.
The switching to jog run cannot be performed during operation. When switching to Jog Run mode, operation has to
be stopped temporarily.
Rem " is displayed, it turns to "
Update " is displayed. ([F1] key is in ON State)
C-5
Loc /Rem". ([F1] key is in ON State)
Language selection
V English
Top
F1
Language selection
V English
Top
F1
Top View Mode
FWD 60.0 Hz
0.0
Lng
Quick
E6581429
3
STOP
Hz
JOG