Navigating And Selecting In Computer Setup; Restoring Factory Settings In Computer Setup - HP ProBook 430 G1 Maintenance And Service Manual

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
To select a menu or a menu item, use the
●
press enter, or use a pointing device to click the item.
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
●
screen, or use the up arrow key or the down arrow key.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
●
then follow the on-screen instructions.
NOTE:
keyboard to navigate and make selections in Computer Setup.
2. Press f10
To exit Computer Setup menus, choose one of the following methods:
To exit Computer Setup menus without saving your changes:
●
Click the Exit icon in the lower-left corner of the screen, and then follow the on-screen instructions.
– or –
Use the
enter.
To save your changes and exit Computer Setup menus:
●
Click the Save icon in the lower-left corner of the screen, and then follow the on-screen
instructions.
– or –
Use the
enter.
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2. Press f10
3. Use a pointing device or the arrow keys to select File > Restore Defaults.
You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
to enter Computer Setup.
key and the arrow keys to select File > Ignore Changes and Exit, and then press
tab
key and the arrow keys to select File > Save Changes and Exit, and then press
tab
to enter Computer Setup.
Windows 7 – Computer Setup (BIOS) and Advanced System Diagnostics
esc while the "Press the ESC key for Startup Menu"
tab key and the keyboard arrow keys and then
esc while the "Press the ESC key for Startup Menu"
77