Table of Contents
Advertisement
8.
Lift the bracket (2) up and out of the base enclosure.
9.
Remove the 3 Phillips PM2.5×5.0 screws (1) that secure the display to the computer.
10.
Lift the display assembly straight up and remove it (2).
CAUTION:
routed and arranged properly.
Failure to properly route the antennas can result in degradation of the computer's WLAN and
WWAN performance.
11.
To replace the display bezel, remove the 2 screw covers (1) and the 2 Phillips PM2.5×4.0 screws
(2) from the bottom corners of the display bezel.
12.
Release the hooks (3) that secure the bezel to the display enclosure.
66
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
When reinstalling the display assembly, be sure that the wireless antenna cables are
- Quick Links:
- Computer Major Components
- Keyboard
- Hard Drive
Hide quick links:
Advertisement
Table of Contents
