Original Setting; To Specify The Original Settings - Konica Minolta bizhub 600 User Manual

Scanning Documents

Original Setting

Specify the type of document that is loaded, for example, if it contains mixed
sizes or is a thick document.
Note
These functions can be combined.
Item
Mixed Original
Z-Folded Original
Original Direction
Bind

To specify the Original Settings

1
Touch [Scan Settings] in the Scan mode screen.
2
Touch [Original Setting].
bizhub 750/600
Description
Select this setting when documents of different sizes are
loaded into the ADF. The scan speed is decreased since the
size of each page is detected before it is scanned.
Select this setting when the loaded document is folded in a
zigzag.
Specifies the orientation of the document. The data is
processed so that the top and bottom ends are correctly
positioned when the document is scanned.
Specifies the binding position for punched holes and staples.
This function adjusts the binding position so that it is not re-
versed when a double-sided document is scanned.
Left: A document with a bind on the left side.
Top: A document with a bind on the top side.
Right: A document with a bind on the right side.
Auto: If the length is 11-3/4 in. or less, the binding position is
along the long side of the paper. If the length is more than
11-3/4 in., the binding position is along the short side of the
paper.
2
2-55