Protective Conductor Connection And Shield Support - Siemens S120 Manual

Hide thumbs Also See for S120:

Table of Contents

Supplementary system components and encoder system integration

8.1 Sensor Modules

Protective conductor connection and shield support

Shield contacts are only required if the system is connected to X521/X531.

The bending radii of the cables must be taken into account (see MOTION-CONNECT

description).

Damage or faulty operation due to incorrect shielding or inadmissible cable lengths

If the correct shielding procedures or the permissible cable lengths are not observed, it can

cause damage or the machine may malfunction.

• Only use shielded cables.

• Do not exceed the cable lengths stated in the technical data.

Protective conductor connection M4 / 1.8 Nm

Shield connection terminal, Weidmüller company, type: KLBÜ CO1, order number:

Shield support and protective conductor connection

Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4