Sharp AQUOS Operation Manual page 75

>>
Using a PC
<<
Control of the TV (Continue)
CONTROL ITEM COMMAND
CHANNEL DIRECT D C
CHANNEL
(DIGITAL)
D C
CH UP C H
CH DOWN C H
CC C L
DEVICE NAME T V
MODEL NAME M N
PARAMETER CONTROL CONTENTS
1 0 * * * * (0-9999)
1 1 * * * * (0-6383)
U P x _ _ _ The channel
number of TV
+1
D W x _ _ _ The channel
number of TV
-1
C P x _ _ _ (Toggle)
N M 1 _ _ _
R D 1 _ _ _
CONTROL ITEM
SOFTWARE S
VERSION
DIGITAL Cable
(One-Part
IP PROTOCOL I
numbers, 5-
VERSION
digit, less than
10,000)
DIGITAL Cable
NOTE
(One-Part
If an underbar (_) appears in the parameter column, enter a space.
numbers, 5-
If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL
digit, more than
CONTENTS.
10,000)
Any numerical value can replace the "x" on the table.
If it is not TV
display, it will
input-switch to
TV. (same
function as CH
)
If it is not TV
display, it will
input-switch to
TV. (same
function as CH
)
Toggle
operation of a
closed caption.
The device
name set in
"Device Name
Setting" is
displayed.
The model
name of the TV.
ENG 7-7
COMMAND PARAMETER
W V N 1 _ _ _
P P V 1 _ _ _
CONTROL CONTENTS
The current version
of the TV software
is displayed.
The currently
supported version
of IP protocol is
displayed.