Sharp AQUOS Operation Manual page 50

>>
On-Screen Display Menu
<<
Example
System Options (Continue)
Public Mode
4. On Setting Items
1. POWER ON FIXED
Selection Selection between "Variable" and "Fixed"
Default - (Variable)
In "Fixed setting, the power-off by the power key of the unit is invalidated and the image is kept being received.
Explaination
The power can be turned off by stopping the power supply from AC.
Limit in Setting Rfer to the "Power-On Fixed" sheet.
Exception None
In "Variable" setting, the power operation is in wait for 1 sec and then turn off when the main power switch is
Remarks
off.
2. MAXIMUM VOLUME
Selection Adjustment from 0 to 100
Default 100
Explaination Sound volume can not be adjusted higher than the present value.
When the sound volume is set lower than 99, only figures are displayed and the sound volume bar is not
Limit in Setting
displayed.
Exception
When the sound volume is set higher than the MAX setting by the adjusting process, the sound volume control
Remarks
operation is prohibited for turn-up and the sound volume should be turned down to MAX in this state.
3. VOLUME FIXED
Selection Selection between "Variable","Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)"
Default (Variable)
Explaination FIXED: Fixed at the level adjusted for a fixed volume.
AC CTRL: Start-up at the level specified for a fixed volume at ACON.
AC/RC CTRL: Start-up at the level specified for a fixed volume at start.
Limit in Setting The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting
is made impossible. (Basically, the menu is not displayed.)
The following keys become invalid:
Sound volume Up/Down (VOL +/–) [for both
remote control and the unit]
Mute (MUTE)
Exception In the item "VOLUME" of adjustment process, the sound volume can be set freely irrespective of this setting.
As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority.
Remarks Once the sound volume has been changed by adjustment process, it should be set back to the sound volume
preset by sound volume fixing level when the adjustment process ends.
ENG 4-29