Sharp AQUOS Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. Aquos
  6. Operation manual
Sharp AQUOS Operation Manual

Sharp AQUOS Operation Manual

4k ultra hd commercial lcd tv
Hide thumbs Also See for AQUOS:
Table of Contents

Advertisement

Quick Links

>>

Advertisement

Table of Contents
loading

Related Manuals for Sharp AQUOS

Summary of Contents for Sharp AQUOS

  • Page 1 >>...
  • Page 2 << DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp LCD TV. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
  • Page 3 Page 1 of 1 >> Important << IMPORTANT SAFETY INSTRUCTIONS Additional Safety Information 15)Power Sources—This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
  • Page 4 Page 1 of 1 >> Important << IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure t h e antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
  • Page 5 Page 1 of 1 >> Important << IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
  • Page 6 Page 1 of 1 >> Important << IMPORTANT SAFETY INSTRUCTIONS WARNING – Stability Hazard A television set may fall causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: - ALWAYS use cabinets or stands or mounting method recommended by the manufacturer of the television set.
  • Page 7 • If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD- CLOTH-3) packs.
  • Page 8 Page 1 of 1 >> Important << IMPORTANT SAFETY INSTRUCTIONS Especially for child safety – Don’t allow children to climb on or play with the TV. – Don’t place the TV on furniture that can easily be used as steps, such as a chest of drawers.

  • Page 9: Table Of Contents

    Page 1 of 1 >> Contents << 1. Part Names 5. Enjoying Photo/Music/Video Playback 9. Appendix 1-1. TV (4T-B60CJ1U/4T-B70CJ1U/4T-B80CJ1U) 5-1. Preparation 9-1. Setting the TV on the Wall 1-2. Remote Control Unit 5-2. Selecting the Folders to Play Back 9-2.

  • Page 10: Part Names

    Page 1 of 1 >> Part Names << TV (4T-B60CJ1U/4T-B70CJ1U/4T-B80CJ1U) (Rear) (Front) See page 4-26. (Side) • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.

  • Page 11: Remote Control Unit

    Page 1 of 1 >> Part Names << Remote Control Unit 1 POWER: Switch the TV power on or enter standby. 2 DISPLAY: Display the channel information. 3 SLEEP: Set the sleep timer (See page 3-6.) 4 0–9: Set the channel.

  • Page 12: Introduction

    Page 1 of 1 >> Introduction << Displaying an External Equipment Image To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. Example 1 Press INPUT.

  • Page 13: Initial Installation

    Page 1 of 1 >> Introduction << Initial Installation Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. 2. Connect the antenna cable to the TV.
  • Page 14 Page 1 of 1 >> Introduction << Initial Installation (Continue) Antenna & Cable/STB Power Saving Select the type of connection you will use to watch TV. Select "Si" or "No" to configure default Display settings. 3 Press / to select "Antenna & Cable" or "Set-top box", and 2 Press to select "Yes"...
  • Page 15 Page 1 of 1 >> Introduction << Initial Installation (Continue) CH Search (Channel search) Channel auto search makes the TV look for all channels viewable in the set area. 4 When "Air" is selected in Antenna setting: Press to select "Start", and then press ENTER.
  • Page 16 Page 1 of 1 >> Introduction << Initial Installation (Continue) Examples of the settings confirmation screen When "Antenna & Cable" was selected in step 3. Completed 5 The settings confirmation screen is displayed. Confirm the information displayed on the screen, and then press ENTER.
  • Page 17 Page 1 of 1 >> Introduction << Initial Installation (Continue) NOTE • For changing the settings of the Initial Installation, perform NOTE "Easy Setup" on the Initial Setup menu on page 4-5. • If no channel is found, confirm the type of connection made with your TV and try "Easy Setup"...

  • Page 18: Direct Button Operation

    Page 1 of 1 >> Direct Button Operation << Changing Channels NOTE • When selecting a 1-digit channel number, it is not You can change channels in several ways. necessary to press 0 before the number. Method 1 •...

  • Page 19: Changing Volume

    Page 1 of 1 >> Direct Button Operation << Changing Volume You can change the volume by pressing VOL+/- on the TV or on the remote control unit. • To increase the volume, press VOL +. • To decrease the volume, press VOL -.

  • Page 20: Mute

    Page 1 of 1 >> Direct Button Operation << MUTE Mutes the current sound output. Press (MUTE). • " " will be displayed on the screen for 30 minutes, and the sound is silenced. NOTE • Mute can be cancelled by pressing VOL+/- or MUTE.

  • Page 21: Apps

    Page 1 of 1 >> Direct Button Operation << APPS Allows you to directly activate various types of applications. 1 Press APPS to display the application window. • Press APPS again to switch back to the currently select input.

  • Page 22: Mpx

    Page 1 of 1 >> Direct Button Operation << When receiving a monaural signal When you press AUDIO (MPX), “Mono” displays. Switching the digital audio format (DTV only) If multi sound modes are received, each time you press AUDIO (MPX) the mode switches.

  • Page 23: Sleep Timer

    Page 1 of 1 >> Direct Button Operation << Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP. • The remaining time displays when the sleep timer has been set.

  • Page 24: On-Screen Display Menu

    Page 1 of 1 >> On-Screen Display Menu << Introduction LCFONT embedded Guide display Item displayed in white • This indicates the buttons that can be operated on the • This indicates that the item can be selected.
  • Page 25 LCFONT: • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. ENG 4-2 file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/4-2.html?next...

  • Page 26: On-Screen Display Menu Operation

    Page 1 of 1 >> On-Screen Display Menu << On-Screen Display Menu Operation Example 1 Press MENU to display the MENU screen. 3 Press MENU to exit. Press to select the desired menu. NOTE • Menu options differ in the selected input modes, but the...

  • Page 27: Menu Operation Buttons

    Page 1 of 1 >> On-Screen Display Menu << Menu Operation Buttons Using the control panel of the TV You can also operate the menu with the control panel of the Using the remote control Button operations on the control panel correspond to the ones Use the following buttons on the remote control to operate the on the remote control as shown below.

  • Page 28: Initial Setup

    Page 1 of 1 >> On-Screen Display Menu << Initial Setup Language Example You can also select a language from the Initial Setup menu. NOTE Select from among 3 languages: English, French and • For operating the on-screen display menu, Spanish.
  • Page 29 Page 1 of 1 >> On-Screen Display Menu << Initial Setup (Continue) Antenna Setup-DIGITAL Example In order to receive digital air broadcasts, you need a digital TV Channel Setup broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup-DIGITAL" screen. If...
  • Page 30 Page 1 of 1 >> On-Screen Display Menu << • The U.S. has two rating systems for viewing content: TV Initial Setup (Continue) Parental Guidelines and movie ratings. Example • The TV Parental Guidelines work in conjunction with the...
  • Page 31 Page 1 of 1 >> On-Screen Display Menu << Content Initial Setup (Continue) FV: Fantasy violence. Example V: Violence. Individual Setup S: Sexual situation. L: Adult language. Parental Control D: Sexually suggestive dialog. (Parental Control Setting) Content...
  • Page 32 Page 1 of 1 >> On-Screen Display Menu << Initial Setup (Continue) Canadian French Ratings Example E: Exempt programming. Individual Setup G: General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a Parental Control humorous or unrealistic manner.
  • Page 33 Page 1 of 1 >> On-Screen Display Menu << Initial Setup (Continue) Quick Start Mode Example When this function is activated, you can reduce the Monitor's Individual setip start-up time or even let the TV in standby mode start...
  • Page 34 Page 1 of 1 >> On-Screen Display Menu << Initial Setup (Continue) Audio Output Select Example You can select which device is used for outputting audio. Input Settings Headphone: Output audio through headphones. Audio out: Output audio through an external AMP.
  • Page 35 Page 1 of 1 >> On-Screen Display Menu << Initial Setup (Continue) Reset Example If complex adjustments are made and the settings cannot be Input Settings restored to normal, you can reset the settings to the factory preset values.

  • Page 36: Information

    Page 1 of 1 >> On-Screen Display Menu << Information Manual Update Example Select the method for manually updating the software. NOTE USB Update: Updates the software using a USB memory • For operating the on-screen display menu, device containing the update file.
  • Page 37 Page 1 of 1 >> On-Screen Display Menu << Information (Continue) 4 During the data checking, "Checking" blinks. • The current version of the Monitor software and the Example version of the update file on the USB memory device Software Update are displayed.
  • Page 38 Page 1 of 1 >> On-Screen Display Menu << Information (Continue) Updating the Software via the Network Example 1 Press / on the Manual Update screen to select "Network Software Update Update", and then press ENTER. • The TV connects to the network and checks for updates.

  • Page 39: Picture Settings

    Page 1 of 1 >> On-Screen Display Menu << Picture Settings AV MODE (Changing Pic.Quality) Example Adjusts the picture to your preference with the following The audio and picture settings can be changed to suit the program or input content being watched.
  • Page 40 Page 1 of 1 >> On-Screen Display Menu << Picture Settings (Continue) Example Advanced Digital Noise Reduction Produces a clearer video image. AUTO: Automatically adjusts the level of noise reduction. High/Medium/Low: You can select a desired level for viewing a clearer video image.
  • Page 41 Page 1 of 1 >> On-Screen Display Menu << Picture Settings (Continue) Example Advanced Active Contrast Automatically adjusts the image contrast according to the scene. On: Produces high contrast image. Off: No adjustment. Reset Returns Picture Settings to their factory preset values. To reset, select "YES"...

  • Page 42: Audio Settings

    Page 1 of 1 >> On-Screen Display Menu << Audio Settings Bass enhancer powered by SRS Labs, Inc. Example You can adjust the sound quality to your preference with the This function allows you to enjoy bass-enhanced sound.

  • Page 43: Network Settings

    Page 1 of 1 >> On-Screen Display Menu << Network Settings 1 Confirm the current settings in "Connection Type". • If "Wired" is selected, press / to select "Wireless". Example 2 Select the desired connection method and follow the Dashboard instructions shown on the display.
  • Page 44 Page 1 of 1 >> On-Screen Display Menu << Network Settings (Continue) Example Device Name Set this function when operating the TV from equipment connected by LAN or wireless LAN. Use the software keyboard when you need to input text at Device Name Setting.

  • Page 45: System Options

    Page 1 of 1 >> On-Screen Display Menu << System Options Example NOTE • For operating the on-screen display menu, see page 4-3. Power Control Power control setting allows you to save energy. No Signal Off When this function is enabled, the TV automatically shuts down if no signal is received for more than 15 minutes.
  • Page 46 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example View option Wide mode This function changes the screen size. Select "View Option" on the menu to display the Wide mode menu screen. The Wide mode menu varies depending on the input source.
  • Page 47 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example View option Wide mode For SD Video source Example: Screen size images Normal Full Cinema 16:9 Keeps the original aspect ratio in a full For 16:9 squeeze pictures.
  • Page 48 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example View option Wide mode For USB-Video, Home Network, HDMI VGA (PC format) Example: Screen size images Input signal Normal Dot by Dot Full Keeps the original...
  • Page 49 Startup Screen • It will be interrupted by any operation. After a few minutes, it will automatically start again. With this function activated, the SHARP logo will be displayed Public Mode when you turn on the TV. NOTE 1.
  • Page 50 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) PUBLIC MODE Example POWER ON FIXED [ VARIABLE ] Public Mode MAXIMUM VOLUME 100 ] 2. How to exit from Public Mode setup screen There are the following ways to quit the public mode setup...
  • Page 51 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example Public Mode 5. On Setting Items 1. POWER ON FIXED Selection Selection between "Variable" and "Fixed" Default - (Variable) In "Fixed setting, the power-off by the power key of the unit is invalidated and the image is kept being received.
  • Page 52 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example Public Mode 4. VOLUME FIXED LEVEL Selection Adjustment from 0 to 100 Default Explanation The sound volume to be fixed by “Volume fixed” is determined.
  • Page 53 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example Public Mode 7. MENU BUTTON Selection Selection between "Respond" and "No respond" Default Respond In "No respond" setting, the menu operation by the menu key of the remote control and the menu key of the unit Explanation are invalidated.
  • Page 54 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example Public Mode 10. INPUT MODE START Selection Selection between “Normal”, “Air ( )”, "Cable ( )", "Input3", "HDMI 1", "HDMI 2", "USB", "Home Network"...
  • Page 55 Page 1 of 1 >> On-Screen Display Menu << System Options (Continue) Example Public Mode 12. RC PATH THROUGH Selection Selection between “OFF”, “ON: Display RCE” and “ON: Display RCD” Default Explanation Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.

  • Page 56: Enjoying Photo/Music/Video Playback

    Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Preparation CAUTION • Do not use a USB extension cable when connecting a USB memory device to the USB You can connect the Monitor to a USB memory device, USB hard drive or Home Network server to terminal on the TV.

  • Page 57: Selecting The Folders To Play Back

    Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Selecting the Folders to Play Back NOTE • 16 is the maximum number of USB drives and 10 is the • To play back data on a USB memory device, insert the USB maximum number of Home Network servers that can be memory device on the TV.
  • Page 58 Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Selecting the Folders to Play Back NOTE • USB 1.1 devices may not be played properly. (Continue) • Operation using USB hubs is not guaranteed. • Some video file formats may not be played depending on Video file format the file.

  • Page 59: Playing Back Files On A Usb Memory Device/Home Network Server

    Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Buttons for thumbnail operations Buttons Description Memory Device/Home Network Server / / / Select a desired item. ENTER When selecting a folder icon: NOTE Enter this directory.
  • Page 60 Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Memory Device/Home Network Server (Continue) Slide Show The photos displayed on the thumbnail selection screen are displayed as a slide show. Buttons for slide show operation...
  • Page 61 Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Memory Device/Home Network Server (Continue) Music Mode Example Buttons for music mode Buttons Description / / / Select a desired item. ENTER When selecting a folder icon: Enter this directory.
  • Page 62 Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB NOTE • A few seconds after the cursor is positioned on a Memory Device/Home Network thumbnail, the file information is displayed in the right of Server (Continue) the center of the screen.
  • Page 63 Page 1 of 1 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Memory Device/Home Network Server (Continue) Buttons for playing mode Buttons Description Stop playback Stop playback Fast forward Fast rewind A (red) Subtitle...

  • Page 64: Using Link Operation

    Page 1 of 1 >> Using LINK Operation << Connected LINK-compatible devices can be operated without changing the settings of the remote Controlling HDMI Equipment Using LINK Operation control unit. The OPTION button will function only when LINK Operation is used.
  • Page 65 Page 1 of 1 >> Using LINK Operation << Controlling HDMI Equipment Using Audio Return Channel LINK Operation (Continue) This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which conventionally is required.

  • Page 66: Link Operation Menu

    Page 1 of 1 >> Using LINK Operation << Link Operation Menu Device Power On/Off You can manually turn on/off the power of the connected LINK-compatible equipment. Each time you press ENTER, the connected equipment switches on or off.
  • Page 67 Page 1 of 1 >> Using LINK Operation << Link Operation Menu (Continue) Change Audio Output Device You can select to listen to the TV sound only from the LINK- Show Start Menu compatible audio system. You can call up a setup menu from the connected LINK- Audio Return Channel: The sound from the TV speaker is compatible equipment.

  • Page 68: Using A Pc

    Page 1 of 1 >> Using a PC << Control of the TV Communication Conditions for IP Connect to the TV with the following settings made for IP on the PC. The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP.
  • Page 69 Page 1 of 1 >> Using a PC << Control of the TV (Continue) Command table • Commands not indicated here are not guaranteed to operate. Command format CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS Eight ASCII codes +CR...
  • Page 70 Page 1 of 1 >> Using a PC << Control of the TV (Continue) CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS WIDE MODE 0: (Toggle), It is the same as CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS 1: Normal, Wide Mode key.
  • Page 71 Page 1 of 1 >> Using a PC << Control of the TV (Continue) CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS CHANNEL DIRECT An input change is CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS CHANNEL channel included if it is not...
  • Page 72 Page 1 of 1 >> Using a PC << Control of the TV (Continue) CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS SOFTWARE The current version CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS VERSION of the TV software is displayed.
  • Page 73 Page 1 of 1 >> Using a PC << Control of the TV (Continue) NOTE • If an underbar (_) appears in the parameter column, enter a space. CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS • If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

  • Page 74: Pc Compatibility Chart/Av Compatibility Chart

    Page 1 of 1 >> Using a PC << PC Compatibility Chart AV Compatibility Chart It is necessary to set the PC correctly to display XGA and WXGA signal. Horizontal Vertical Vertical Resolution VESA Standard Resolution HDMI...

  • Page 75: Using The Internet

    Page 1 of 1 >> Using the Internet << By connecting your TV to a broadband system, you can access the Internet from the TV. NOTE Connecting to the Internet • This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply with regulations on radio communications.

  • Page 76: Entering Text (Software Keyboard)

    Page 1 of 1 >> Using the Internet << Entering Text (Software Keyboard) When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter text from the software keyboard. NOTE •...
  • Page 77 Page 1 of 1 >> Using the Internet << Entering Text (Software Keyboard) Buttons on the Description remote control unit (Continue) / / / Moves the focus. When moved at Enter the far edge, the focus moves to the opposite edge.

  • Page 78: Using The Browser

    Page 1 of 1 >> Using the Internet << Using the Browser Using the Application Window During Dock Display 1 Press APPS, press to select the browser icon from the application window, and then press ENTER. You can move the application icons.
  • Page 79 Page 1 of 1 >> Using the Internet << Using the Browser (Continue) Selected item Description Selected item Description Allows you to go back to the previous page. Displays the bookmarks list. Allows you to go to the next page.
  • Page 80 Page 1 of 1 >> Using the Internet << Using the Browser (Continue) About links • Web pages on the Internet often include "links" that allow you to jump to other web pages (or sites). CAUTION • "Links" can take various forms, including words or images, •...
  • Page 81 Page 1 of 1 >> Using the Internet << Using the Browser (Continue) Browser Settings You can check or modify your browser settings from the Browser menu. 1 Press / to select " " in the toolbar, and then press ENTER.

  • Page 82: Using Keyboard And Mouse

    Page 1 of 1 >> Using the Internet << Using Keyboard and Mouse You can use a keyboard or mouse for operating the TV while using the browser. • When you use the USB devices, connect the device to the USB terminal on the TV.

  • Page 83: Appendix

    • Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV. • Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.

  • Page 84: Troubleshooting

    Page 1 of 1 >> Appendix << Troubleshooting Problem Possible Solution • No picture • Is connection to other components correct? Problem Possible Solution • Is the correct input selected? Pages 2-1 • No power • Check if you pressed POWER on the remote control unit.
  • Page 85 Page 1 of 1 >> Appendix << Troubleshooting (Continue) Cautions regarding use in high and low temperature environments • When the unit is used in a low temperature space (e.g. room, office), the picture may leave Problem Possible Solution trails or appear slightly delayed.

  • Page 86: Specifications

    CAUTION • Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

  • Page 87: Wireless Lan

    Page 1 of 1 >> Specifications << Wireless LAN Specification Standard IEEE 802.11b/g/n Static WEP (64/128 bit kry index 1 only) Security WPA-PSK (TKIP) WPA2-PSK (AES) IEEE802.11b: DBPSK, DQPSK, CCK / DSSS HRDSSS Modulation IEEE802.11g: BPSK, QPSK, 16QAM, DBPSK, DQPSK, CCK, PBCC / OFDM IEEE802.11n: BPSK, QPSK, 16QAM, 64QAM / OFDM...

  • Page 88: Trademarks

    LC logo mark are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too.

  • Page 89: Dimensional Drawings

    Page 1 of 1 >> Dimensional Drawings << 4T-B60CJ1U Unit: mm *1 Active area *2 Thinnest part *3 Including projecting parts ENG 12-1 file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/12-1.html?next 2020/3/24...
  • Page 90 Page 1 of 1 >> Dimensional Drawings << 4T-B70CJ1U Unit: mm *1 Active area *2 Thinnest part *3 Including projecting parts ENG 12-2 file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/12-2.html?next 2020/3/24...
  • Page 91 Page 1 of 1 >> Dimensional Drawings << 4T-B80CJ1U Unit: mm *1 Active area *2 Thinnest part *3 Including projecting parts ENG 12-3 file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/12-3.html?next 2020/3/24...

  • Page 92: Software License

    Page 1 of 1 >> Software License << Information on the open-source software license. /src/Platform_Lib/Graphics/DirectFB/DirectFB-1.4.2 /open_source/curl/curl-7.32.0 Software composition /open_source/libwebp/libwebp-0.4.1 The software included in this product is comprised of various software components whose individual /open_source/FastJpegLib/jpeg-6b copyrights are held by third parties.
  • Page 93 Page 1 of 1 >> Software License << Software copyrights Utility: wpa_supplicant Bootcode: BSD http://tv.realtek.com/LGPL/wpa_supplicant-2.4.tar.gz uboot GPL V2 http://tv.realtek.com/LGPL/uboot.tgz lzma public domain http://tv.realtek.com/LGPL/lzma-4.65.tgz Kernel: vmlinux Harfbuzz GPL V2 http://tv.realtek.com/LGPL/linux-3.7.2.tgz http://tv.realtek.com/LGPL/harfbuzz-0.9.35.tar.bz2 busybox GPL V2 http://tv.realtek.com/LGPL/busybox-1.18.4.tgz Graphite Apache 2.0 http://tv.realtek.com/LGPL/graphite2-1.2.4.tgz e2fsprogs GPL V2 http://tv.realtek.com/LGPL/e2fsprogs-1.42.6.tar.gz...
  • Page 94 Page 1 of 1 >> Software License << libpng BigDigits libpng license. http://www.di-mgt.com.au/bigdigitsCopyright.txt http://tv.realtek.com/LGPL/bigdigits.tar.gz FreeType freetype Http: neon c-ares GPL http://tv.realtek.com/LGPL/HTTPC.tar.bz2 DLNA: Miracast: upnp openSSL No License OpenSSL/SSLeay http://tv.realtek.com/LGPL/upnp.1.6.16.tar.gz http://tv.realtek.com/LGPL/upnp.tar.bz2 expat MIT/X photo: jpeg6b zlib public domain http://tv.realtek.com/LGPL/jpegsrc.v6b.tar.gz...
  • Page 95 Page 1 of 1 >> Software License << c-ares GNU GENERAL PUBLIC LICENSE C89 compatibility, MIT licensed http://tv.realtek.com/LGPL/c-ares-1.9.1.tgz Version 2, June 1991 http://tv.realtek.com/LGPL/c-ares-1.10.0.tar.gz Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA ICU license , a simple, permissive non-copyleft free software license, compatible with the GNU GPL.
  • Page 96 Page 1 of 1 >> Software License << Also, for each author's protection and ours, we want to make certain that everyone understands that 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based there is no warranty for this free software.
  • Page 97 Page 1 of 1 >> Software License << 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code 5. You are not required to accept this License, since you have not signed it. However, nothing else or executable form under the terms of Sections 1 and 2 above provided that you also do one of the grants you permission to modify or distribute the Program or its derivative works.
  • Page 98 Page 1 of 1 >> Software License << 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING...
  • Page 99 Page 1 of 1 >> Software License << You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  • Page 100 Page 1 of 1 << file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/14-1.html?next 2020/3/24...

This manual is also suitable for:

Aquous 4t-b60cj1uAquous 4t-b70cj1uAquous 4t-b80cj1u

Table of Contents