Option Settings - Philips Q552.2E Service Manual

EN 44 6. Q552.2E LA
If you do not have a colour analyser, you can use the default
values. This is the next best solution. The default values are
average values coming from production.
• Select a COLOUR TEMPERATURE (e.g. COOL,
NORMAL, or WARM).
• Set the RED, GREEN and BLUE default values according
to the values in Table 6-3
• When finished press OK on the RC, then press STORE (in
the SAM root menu) to store the aligned values to the NVM.
• Restore the initial picture settings after the alignments.
Table 6-3 White tone default setting 32" (Blockbuster)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-4 White tone default setting 37" (Blockbuster)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-5 White tone default setting 40" (Blockbuster)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-6 White tone default setting 46" (Blockbuster)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-7 White tone default setting 55" (Blockbuster)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-8 White tone default setting 32" (Sundance)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-9 White tone default setting 42" (Sundance)
White Tone
Colour Temp
Normal
Cool
Warm
2011-Jun-01
Alignments
to Table 6-15.
e.g. 32PFL66x6x
R G B
127 125 104
123 127 119
127 116 62
e.g. 37PFL66x6x
R G B
122 104 127
103 91 127
127 98 84
e.g. 40PFL66x6x
R G B
124 126 109
118 126 123
127 120 69
e.g. 46PFL66x6x
R G B
127 123 96
126 126 113
127 120 54
e.g. 55PFL66x6x
R G B
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
e.g. 32PFL74x6x
R G B
112 110 127
74 98 127
127 111 95
e.g. 42PFL74x6x
R G B
111 115 127
94 104 127
127 118 96
Table 6-10 White tone default setting 47" (Sundance)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-11 White tone default setting 32" (Sundance 3D)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-12 White tone default setting 37" (Sundance 3D)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-13 White tone default setting 42" (Sundance 3D)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-14 White tone default setting 47" (Sundance 3D)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-15 White tone default setting 55" (Sundance 3D)
White Tone
Colour Temp
Normal
Cool
Warm
6.4

Option Settings

6.4.1 Introduction
The microprocessor communicates with a large number of I
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these
PNX51XX ICs (back-end advanced video picture improvement
IC which offers motion estimation and compensation features
(commercially called HDNM) plus integrated Ambilight control)
is made known by the option codes.
Notes:
• After changing the option(s), save them by pressing the OK
button on the RC before the cursor is moved to the left,
select STORE in the SAM root menu and press OK on the
RC.
• The new option setting is only active after the TV is
switched "off" / "stand-by" and "on" again with the mains
switch (the NVM is then read again).
back to
div. table
e.g. 47PFL74x6x
R G B
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
e.g. 32PFL76x6x
R G B
108 114 127
90 103 127
127 121 103
e.g. 37PFL76x6x
R G B
126 125 127
112 112 127
127 113 86
e.g. 42PFL76x6x
R G B
122 125 126
111 113 127
127 117 84
e.g. 47PFL76x6x
R G B
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
e.g. 55PFL76x6x
R G B
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
t.b.d. t.b.d. t.b.d.
2
C