Ford EXPEDITION 2017 Owner's Manual page 302

E208657
Rear jacking point
E175447
1. With the vehicle on level ground, block
both sides of the wheel diagonally
opposite (other side and end of the
vehicle) to the wheel being changed.
Do not jack the vehicle on a hill or
incline.
2. Obtain the spare tire and jack tools
from their storage locations.
3. Use the tip of the jack handle to
remove any wheel trim.
4. Loosen each wheel lug nut one-half
turn counterclockwise but do not
remove them until the wheel is raised
off the ground.
5. Position the jack according to the jack
locator arrows found on the frame and
turn the jack handle and extension tool
assembly clockwise.
Expedition (TB7) Canada/United States of America, enUSA, Edition date: 201604, Third Printing
Wheels and Tires
6. Raise the vehicle to provide sufficient
Installing the Spare Tire
E175447
1.
2. Replace the flat tire with the spare tire,
3. Reinstall the lug nuts until the wheel is
4. Lower the wheel by turning the jack
E166719
299
ground clearance when installing the
spare tire, about 1/4 inch (6
millimeters).
Remove the lug nuts with the lug
wrench.
making sure the valve stem is facing
outward.
snug against the hub. Do not fully
tighten the lug nuts until the wheel has
been lowered.
handle counterclockwise.
1
3
5
4
6
2