Error Messages - Yamaha DISKLAVIER ENSPIRE User Manual

3
Tap on (Back) to return to the [DisklavierTV] function menu screen.

Error Messages

Number Message
0000 Network OK.
2012 Failed to connect.(2012)
Check Network setting.
2013 Failed to connect.(2013)
Check DNS setting.
2014 Failed to connect.(2014)
DNS is not available.
2015 Failed to connect.(2015)
Check Proxy setting.
2010 Failed to connect.(2010)
Cannot connect to server.
2011 Failed to connect.
Remedy
No problem.
Make sure that the IP address of your Disklavier has been set
correctly.
Make sure that the DNS server address has been set correctly.
Make sure that the overall network settings (DHCP setting, DNS
server address, IP address, subnet mask and gateway server
address) on your Disklavier have been set correctly. If the problem
persists, please contact your internet service provider.
Make sure that the proxy server has been set correctly.
The RemoteLive server may be temporarily down for maintenance.
Please try again later.
Check the cable.
DisklavierTV User's Guide (For Disklavier ENSPIRE Users)
Appendix
29