Switch Box (Rear Panel) - Yamaha DISKLAVIER ENSPIRE User Manual

„ Switch Box (Rear Panel)
1 AUTO PLAY switch
For activating or deactivating the auto
play function. If you leave the switch set
to "ON," playback automatically starts
when the power is turned on.
2 AUTO OFF MODE switch
For activating or deactivating the auto
power-off function. Set this switch to ON
to turn the power off automatically if you
do not use the Disklavier for the time
specified with the ENSPIRE Controller
app.
Note:
When set to ON, the Disklavier automatically
turns off under the following conditions (for the
specified time)
• No operation has been performed on the switch
box.
• No operation has been performed on the
ENSPIRE Controller app.
• The keyboard has not been played.
• The Disklavier has not received MIDI data.
1 2 3 4
3 MAINTENANCE button
For service personnel only. Do not touch
this button.
4 USB port
Used to connect the USB wireless LAN
adaptor (UD-WL01).
Note:
The unit cannot detect the USB flash memory if
two or more memory devices are connected at
the same time.
5 WLAN switch
For setting the method for wireless LAN
connection when connecting the USB
wireless LAN adaptor to the USB port.
DisklavierTV User's Guide (For Disklavier ENSPIRE Users)
Introduction
5
6