Components (Fig. 1); Intended Use - DeWalt DWV010 Instruction Manual

FIG. 1
B
A
C
E
M
L
J
H
N
overheating. D WALT tools are factory tested; if this tool does not
E
operate, check power supply.
NOTICE: DO NOT operate this tool on D.C. current. Tool damage
may occur.
SAVE THESE INSTRUCTIONS
G
K
F
D
O

COMPONENTS (FIG. 1)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
A. Top handle/cord wrap
B. Power cord
C. Vacuum head
D. Canister latch
E. On/off switch
F. Canister
G. Anti-static suction hose
H. Casters
ANTI-STATIC HOSE
The DWV010 is equipped with an anti-static grounding system
including an anti-static hose which will prevent static shocks caused
by vacuuming dry debris.

INTENDED USE

This vacuum is used for fine particulate pick-up, like wallboard,
concrete, wood or surface dust.
DO NOT use in rain or in presence of flammable liquids or gases.
These heavy-duty vacuums are for professional use. DO NOT let
children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
NOTE: This vacuum is intended for commercial use.
ASSEMBLY (FIG. 1–4)
WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect tool from power source before
making any adjustments or removing/installing attachments
or accessories. An accidental start-up can cause injury.
WARNING: When using electric appliances, always follow basic
safety precautions to reduce the risk of fire, electric shock and
personal injury.
4
I. HEPA Filters
J. Threaded hose inlet
K. Hose strap
L. Tool control switch
M. Outlet for power tools
N. Bag
O. Airlock connector