Specifications - DeWalt DWV010 Instruction Manual

PROBLEM SOLUTION
Vacuum stops running Thermal overload has been tripped:
1. Turn the vacuum off and disconnect
vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an appropriate
outlet and turn on/off switch to the ON
position ( ) to test. If vacuum will not
restart call 1-800-4-D
433-9258).
Dust comes out while Check for proper installation of the filters.
vacuuming
Ensure filters are not damaged; replace if
necessary.
Ensure filter seals are in place and are
secure.
Automatic filter Listen for the solenoid clicking to ensure
cleaning is not the filter cleaning mechanism is working.
working
Power tool does Ensure tool is plugged into the tool outlet
on the dust extractor.
not turn on the dust
extractor.
Ensure the on/off switch is in the ON
position ( ).
Ensure the tool control switch is in the ON
position ( ).
Volts
Hertz
Rated Current
Nominal Motor Current
Capacity
WALT (1-800-
E
Weight
11

SPECIFICATIONS

DWV010
120 V ~
60
15 A per UL1017
11.8 A
8 gallon (30.2 liters)
21 lbs. (9.5 kg)