Description (Fig. A); Assembly And Adjustments - DeWalt DWH161N Original Instructions Manual

1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
E
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Dust Extractor
The following pictograms are shown on the dust extractor:
Read instruction manual before use.
Date Code Position (Fig. F)
14
The date code , which also includes the year of manufacture,
is printed into the housing.
Example:
2020 XX XX
Year of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Battery pack
2
Battery release button
3
Dust collection box
4
Dust collection box release
buttons
5 Filter cleaning mechanism
6
Dust extractor hose
Intended Use
Your DWH161 cordless dust extractor can be used for mobile
operation to take up dry, non-combustable dusts. Only for
indoor use.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT pick up materials that present a risk of explosion,
glowing or burning materials, flammable materials, gases or
other hazardous substances.
nOTE: This appliance is suited for professional and commercial
use, e.g. in hotels, schools, hospitals, factories, shops, offices,
rental companies, and on construction sites.
7
Three position switch
8
Wireless Tool Control™
pairing button
9
LED
10
Carry strap
11 Carry strap hooks
12
Crevice tool
• This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge.
• Children should be supervised to ensure that they do not
play with the appliance.
WALT Bluetooth® Tool Tag Ready (Fig. H)
D
E
Optional Accessory

WARNING: Read instruction manual for the D
Bluetooth® Tool Tag.

WARNING: Turn dust extractor off and disconnect battery
pack before installing the D

WARNING: When installing or replacing the D
Bluetooth® Tool Tag, use only the screws provided. Be sure
to securely tighten the screws.
Your dust extractor comes with mounting holes
installing a D WALT Bluetooth® Tool Tag (DCE041). Use only the
E
original fasteners included with the tool tag. You will need a T15
(Torx) bit tip to install the tag. The D
for tracking and locating professional power tools, equipment,
and machines using the D WALT Tool Connect™ app. For proper
E
installation of the D WALT Tool Tag refer to the D
E
Tag manual.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn the dust extractor off and disconnect
battery pack before making any adjustments or
removing/installing attachments or accessories. An
accidental start-up can cause injury.

WARNING: Use only D
E
Inserting and Removing the Battery Pack
from the Dust Extractor (Fig. B)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Dust Extractor
1
1. Align the battery pack with the rails inside the dust
extractor (Fig. B).
2. Slide the battery pack in until it is firmly seated in the dust
extractor and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
2
1. Press the release button
out of the dust extractor.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D WALT battery packs include a fuel gauge which
E
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
15
button . A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
English
WALT
E
WALT Bluetooth® Tool Tag.
E
WALT
E
17
for
WALT Tool Tag is designed
E
WALT Tool
E
WALT battery packs and chargers.
1
is fully charged.
and firmly pull the battery pack
9