Table of Contents
Advertisement
CHANGING THE DEFAULT SETTINGS
The default image density can be set to Auto, Very Light, Light, Normal,
Dark or Very Dark.
1
Press the [User Tools] button, then "1:
Copy setting" appears.
Press [#], then "Copy" appears.
2
Press [0], [6], then "06: Image Density"
appears.
3
Press [#], then the current default setting
appears.
4
Enter one of the numbers of the following selections using the numeric
keypad to set the default image density to the level you want.
No.
Selected item
1
Auto
2
Very Light
3
Light
Example : To specify "3: Light".
Press [3].
Press [#].
The displayed default value is renewed
after about three seconds.
5
Press the [User Tools] button to complete
the operation.
5-4
No.
Selected item
4
Normal
5
Dark
6
Very Dark
IMAGE DENSITY
User Tools
1:Copy Setting
Copy
(00~11 #)
06:Image Density
Image Density(1~6 #)
1:Auto
Image Density(1~6 #)
3:Light
Image Density
*Light
Copy
(00~11 #)
06:Image Density
100% Ready
1:8½×11
(1~2 #)
1
Light
Advertisement
Table of Contents
