Using The Control Panel - Epson SC-P20000 SERIES User Manual

SC-P20000 Series/SC-P10000 Series User's Guide
Caution:
❏ Fix the roll core for the auto take-up reel unit
in place as described in the documentation.
Dropping the roll core could cause injury.
❏ Be careful that your hands, hair, or other
objects do not get caught in the moving parts
of the auto take-up reel unit.
Failure to observe this precaution could result
in injury.
❏ Do not place your hand into the parts of the
support bar marked with labels. Failure to
observe this precaution could result in your
hand being caught in the mechanism and
being injured.
c
Important:
Confirm that the end of the roll is cut straight
across. The unit will not function as expected if
the end of the roll is wavy or curved.
"Manual cut method" on page 36
U
Note:
See the documentation supplied with the auto take-up
reel unit for information on installation.

Using the Control Panel

This section describes how to use the control panel for
the auto take-up reel unit.
A
Power lamp
Displays the status of the auto take-up reel unit.
Basic Operations
On
Flickering
Blinking
Intermittent
blinking
Off
B
Auto switch
Selects the auto take-up direction.
Backward : The roll is taken up with the printable
Forward : The roll is taken up with the printable
Off
C
Manual switch
Selects the manual take-up direction.
The selected option takes effect when the Auto
switch is in the Off position.
Backward : The roll is taken up with the printable
Forward : The roll is taken up with the printable
47
: The auto take-up reel unit is
ready for use.
: The auto take-up reel unit is
in use.
: The auto take-up reel unit is
in power-saving mode.
: An error has occurred.
: The power is off.
side in.
side out.
: The auto take-up reel unit does not
take up paper.
side in.
The speed will increase after the
button is pressed for more than three
seconds.
side out.
The speed will increase after the
button is pressed for more than three
seconds.