Maintenance; Setup - Epson SC-P20000 SERIES User Manual

SC-P20000 Series/SC-P10000 Series User's Guide

Maintenance

"Maintenance menu" on page 128
U
Menu item
Nozzle Check Print Check Pattern
Printless Nozzle Check
Head Cleaning Select Nozzle & Level
Check And Clean Nozzle
Head Alignment Auto (Bi-D)
Manual(Bi-D)
Restore Settings
Cutter Adjust Cut Position
Maintenance
Replace Cutter
Transportation/Storage

Setup

*1: Only displayed when the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected.
*2: Only displayed when the optional Adobe PostScript 3 Expansion Unit has been connected.
"Setup menu" on page 130
U
Using the Control Panel Menu
Description
Press Z to start printing.
Press Z to start checking.
Displays the combination of nozzle arrays.
Press Z to start head cleaning.
Press Z to start printing/alignment.
Press Z to start printing.
Yes, No
-3 to 3mm
Press Z to start move.
Press Z to start transporting/storing.
118