Specifications - Stihl HL 94 Instruction Manual

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
STIHL single cylinder two-stroke engine
Displacement: 24.1 cc
(1.47 cu.in)
Bore: 35 mm (1.38 in)
Stroke: 25 mm (0.98 in)
HL 94
Engine power to ISO 0.9 kW (1.2 bhp)
8893: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed
(rated): 9,300 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor
type): NGK CMR6H
Electrode gap: 0.5 mm (0.02 in)
Fuel System
Fuel tank capacity: 540 cc (18.3 fl.oz)
Weight
Dry weight with 0° gearbox, 500 mm (20
in)
HL 94: 5.8 kg (12.8 lbs)
Dry weight with 0° gearbox, 600 mm (24
in)
HL 94: 5.9 kg (13.0 lbs)
Dry weight with 145° adjustable gear-
box, 500 mm (20 in)
HL 94: 6.1 kg (13.4 lbs)
Dry weight with 145° adjustable gear-
box, 600 mm (24 in)
HL 94: 6.2 kg (13.7 lbs)
Cutting blades
Type: Double-edged for
bidirectional
cutting
Cutting length: 500 mm (20 in),
600 mm (24 in)
Tooth spacing: 34 mm (1.34 in)
Tooth height: 22 mm (0.87 in)
Sharpening angle: 45° to horizontal
English
33