Table of Contents
Advertisement
Check TV
(11) Is the TV HDCP-compatible?
(12) Is the TV compatible with resolutions of 1080P?
(13) Is the TV's input set to HDMI?
(14) Are the picture and sound output when a different TV is used?
Check set (AVR-1913/2113)
Is a contact part of HDMI connector normal? (Refer to 86 page (*1).)
(15) Is any PIN of the HDMI connector bent or is dust adhering to the
connector?
(16) Is the set's input set to HDMI?
The set does not recognize the TV.
(17) Is TP [HPD-OUT] set to the "H"(3V-5V)?
With the TV connected,check the voltage of the IC on the side on
which the TV is connected.
Is communication waveform confirmed in TP[DDCCLK-OUT/
DDCDATA-OUT]?
Is D1603/D1604/D1605/D1606/D1607/D1608/D1609/D1610
terminated by the TMDS signal of 3.3V and is the signal output?
YES
The BD/DVD player does not recognize the connection with the
set.
(18)
When using a
(19)
DENON BD/DVD
Is HDMI connector (N1001/N1002/N1003/N1004/N1302 : TP[HPD-IN1
player, is the FL
- 5]) set to "H"(3V-5V)?
NO
display's "HDMI"
With the BD/DVD player connected, Check voltage of the HDMI
indicator lit?
connector (N1001/N1002/N1003/N1004/N1302 : TP[+5V - IN 1 - 5]) for
If using a non-
the input on the side on which the BD/DVD player is connected.
DENON BD/DVD
Is communication waveform confirmed in TP[DDCCLK / DDCDATA IN
player, proceed
1 - 5] around each HDMI connector ?
to "NO".
Is TMDS line of HDMI connector (N1001/N1002/N1003/N1004/N1302)
terminated by the TMDS signal of 3.3V and is the signal output?
YES
(20)
VIDEO CONVERT : Is the picture output when it is set to off?
(After item (23) : To be "VIDEO CONVERT:OFF" setting.)
YES
YES
YES
YES
YES
NO
YES
NO
NO
Use an HDCP-compatible TV. PC TVs cannot
be used.
If the TV is not compatible with resolutions of
NO
1080P, no picture will be output, even if the
BD/DVD player resolution is set to 1080P.
NO
Check the TV's input setting, referring to the
TV's operating instructions.
NO
The TV is defective.
NO
The HDMI connector is defective.
Replace the new HDMI connector.
Malfunction of the HDMI connector.
YES
(If dust is adhering, remove the dust and
perform the troubleshooting again from (1).)
NO
Check the set's input setting, referring to the
set's operating instructions.
The pattern and circuit from the HDMI
NO
connector (N1602) to the U1601 are defective,
or HDMI output circuitry is defective (U1601
and surrounding circuitry).
YES
U1601(ADV8002 (AVR-1913) / ADV8003
YES
(AVR-2113)) and surrounding circuitry are
defective.
84
The pattern and
circuit from the
HDMI connector
NO
(N1001/N1002/
N1003/N1004/
N1302) to the IC
(U1001 or U1302)
are defective.
Advertisement
Table of Contents
