Table Of Contents; Original Operating Manual 1 Symbols; Technical Data; Intended Use - Festool CXS Original Operating Manual/Spare Parts List

GB
CXS
Original operating manual
1 Symbols .................................. 12
2 Technical data .......................... 12
3 Intended use............................ 12
4 Machine features ...................... 12
5 Safety instructions .................... 13
6 Operation ................................ 14
7 Settings................................... 14
8 Tool holder, attachments ............ 14
9 Working with the machine .......... 15
10 Service and maintenance ........... 15
11 Accessories .............................. 15
12 Disposal .................................. 15
13 Transport ................................. 16
14 Warranty ................................. 16
15 EU Declaration of Conformity ...... 16
The specified illustrations appear at the begin-
ning of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear protective gloves.
Do not throw in the household waste.
2

Technical data

Cordless drill
Motor voltage
Idling speed*
Max. torque
soft/ hard material
Adjustable torque
Chuck clamping range
Drill diameter max.
Wood/ Metal
12
10,8 V
1st gear 0 - 400 rpm
2nd gear 0 - 1200 rpm
10/ 16 Nm
0,2 - 2,4 Nm
1 - 8 mm
12/ 8 mm
Cordless drill
Tool holder in drill spindle
Weight without battery pack
with Centrotec
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Charging times for
LiIon 1,3 Ah, 80 %/ 100 %
Permitted charging tem-
perature range
Temperature monitoring
Battery pack
Voltage
Capacity
Number of cells
Weight
* Speed specifications with fully charged bat-
tery pack.
3

Intended use

Cordless drills are suitable for drilling into
metal, wood, plastics and similar materials as
well as inserting and tightening screws.
The charger MXC is designed for charging the
battery packs listed.
The charger is designed for internal use only.
The user shall be liable for damage and
accidents resulting from non-specified
use; this also includes damage and wear
caused during industrial continuous op-
eration.
4

Machine features

CXS
[1-1] Torque thumbwheel
[1-2] Drilling symbol
[1-3] Torque/drilling position marking
[1-4] Gear switch
[1-5] Right/left switch
[1-6] On/Off switch
[1-7] Belt clip
[1-8] Button for releasing the battery pack
[1-9] Bit store
CXS
1/4 ''
0,7 kg
MXC
220 - 240 V ~
50/60 Hz
10.8 V=
typ. 2.8 A
approx. 20/ 30
min
-5 °C to
+ 45 °C
via NTC-resistor
BP-XS
10.8 V
1.3 Ah
3
0.2 kg