Page 4
Data on vibration: The calculated and not use spent and recycled battery packs. evaluated vibration acceleration according to The user shall be liable for damages if Festool EN 50 144 is less than 2.5 m/s². original battery packs are not used.
Page 5
The charger MCU 15 (Fig. 3) can be used to (>37°C) is inserted, charging will only be carried charge all Festool battery packs between 4.8 V out at a lower charge current. In this case the and 14.4 V in the battery chamber (3.1).
Insert battery pack into charging chamber: Tool holding fixture, attachments Insert battery pack with the fin (2.2) in the Caution: Make sure that the machine is lower groove (3.5 or 4.1) of the charging switched of and the battery block has been chamber.
Page 7
The accessory and tool order number can be up an should be replaced by a new one. found in the Festool catalogue or on the Store battery packs at ambient temperatures Internet under www.festool.com.
Page 8
Manager Research and Development standardien ja normatiivisten ohjeiden mukainen: EN 50 144, Directeur de recherce et développement EN 55 014, EN 61 000 direktiivien 98/37/EY, 89/336/EY määräysten mukaan. Festool GmbH Wertstr. 20 D-73240 Wendlingen EF-konformitetserklæring: Vi erklærer at have alene Dr. Johannes Steimel ansvaret for, at dette produkt er i overensstemmelse med de følgende normer eller normative dokumenter:...