Installation Plan And Unpacking; Creating An Installation Plan; Preparing The Site; Environmental And Installation Considerations - Eaton 9315 Installation And Operation Manual

Fixed master sync control
Hide thumbs Also See for 9315:
Table of Contents

Advertisement

Chapter 2
Figure
2.1

Creating an Installation Plan

2.2

Preparing the Site

Eaton 9315/9390/9395 Fixed Master Sync Control Installation and Operation Manual

Installation Plan and Unpacking

The Eaton Fixed Master Sync Control is shipped as a separate item and can be
mounted on any surface that can safely bear its weight. See paragraph 2.2 for weight,
dimensions, and wiring preparation.
Before installing the UPS system, read and understand how this manual applies to the
system being installed. Use the procedures and illustrations in the following chapters
to create a logical plan for installing the system.
NOTE Startup and operational checks must be performed by an authorized Eaton Customer Service
Engineer, or the warranty terms as specified on page 5-1 become void. This service is offered as part of the
sales contract for the UPS. Contact service in advance (usually a two-week notice is required) to reserve a
preferred startup date.
For the Eaton Fixed Master Sync Control to operate at peak efficiency, the installation
site should meet the environmental parameters outlined in the applicable Eaton 9315,
Eaton 9390 or Power Xpert 9395 UPS installation and operation manual listed in
paragraph 1.3.
2.2.1

Environmental and Installation Considerations

The life of the Eaton Fixed Master Sync Control is adversely affected if the system is
not installed in a temperature and humidity controlled indoor area free of conductive
contaminants.
Failure to follow guidelines may void your warranty.
The UPS equipment operating environment must meet the weight requirements
shown in Table 2‐1 and the size requirements shown in Figure 2‐1 and Figure 2‐2.
Dimensions are in millimeters (inches).
Table 2‐1. Equipment Weight
Eaton Fixed Master Sync Control
Eaton Master Interface
Model
S
P-164000023 Rev 1 www.eaton.com/powerquality
Weight
kg (lb)
Shipping
Installed
45.4 (100)
36.3 (80)
17.25 (38)
15.0 (33)
2-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

93909395

Table of Contents