If the Error Code is "380", "381", "382", "385", "389"
1
Press the button (A) and open the output tray (a) completely.
The fuser unit is extremely hot. Do not touch it.
2
Remove the four image drums from the machine and place the image drums
on a flat surface.
While removing consumables, be careful not to hit them to the LED head.
Burns may result.
3
Cover the removed image drums with paper so that the image drums are not
exposed to light.
4
Remove the jammed paper slowly by pulling the edge of paper.
5
If paper jams in the fuser unit, press the jam release lever on the fuser unit and
slowly pull the jammed paper toward you.
- 99 -
6. Troubleshooting