Oki C532 User Manual page 87

You can set when to display the "[COLOR] Image Drum Near Life" message. Press the
operator panel to select [Setting] > [Admin Setup] > [User Install] > [Drum Near Life Timing] on the operator panel to
change the setting. Available values are from 500 to 3,000 (in 500 increments).
1
Prepare new image drum.
2
Press the button (A) and open the output tray (a) completely.
3
Identify the image drum that reached its lifetime by its label color.
4
Remove the image drum (b) from the machine and place the image drum on a
flat surface.
While removing consumables, be careful not to hit them to the LED head.
5
Hold the cartridge, pinch the tip of blue lever (c) of the toner cartridge, and turn
it toward you until the tip aligns on the lug of the cartridge.
or button on the
6
Lift the toner cartridge (d) from the right side, and remove it from the image
drum.
7
Unpack a new image drum and place it on a flat surface.
- 87 -
5. Maintenance