Editing/Deleting Speed Dial Destinations - Oki MC160 User Manual

Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.
8
Press the
key.
To check the found information, press the
An e-mail address exceeding 64 characters cannot be specified. If
such an e-mail address is specified,
appears for about two seconds, and then the screen for specifying
the destination address appears.
To narrow down the search results, press the B
perform step 7 again.
9
If desired, edit the registration name, and then press the E
10
If desired, edit the e-mail address, and then press the E
The settings are registered, and the
again.

Editing/Deleting Speed Dial Destinations

Information registered as a speed dial destination can be edited or deleted.
Machine key operations cannot be used to edit/delete an FTP address
or SMB address registered as a speed dial destination. These
addresses can be edited/deleted with the Setup Utility.
1
In the main screen (Scan mode), press the
, and then press the E
ITY
2
Press the
E key.
NTER
3
Press the
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination to be edited/deleted, and then press the E
The information currently registered for the speed dial destination
appears for two seconds.
5
Press the
delete the destination, and then press the E
If
DELETE
ISTER
6
Use the keypad to edit the registration name, and then press the E
key.
Scanning With the Machine
or key to select the desired data, and then press the E
or key to select
or key to select
or key to select
was selected, the settings are deleted, and the
menu appears again.
ADDRESS IS TOO LONG
DIAL REGISTER
key.
NTER
DIAL REGISTER
SPEED DIAL
to edit information or
EDIT
NTER
key.
key, and then
ACK
NTER
key.
NTER
menu appears
or key to select
, and then press the
, and then press the E
NTER
DELETE
key.
DIAL REG-
NTER
key.
UTIL-
NTER
key.
to
NTER
6-23