Registering Speed Dial Destinations (Ldap Search) - Oki MC160 User Manual

A maximum of 64 characters can be entered.

Registering Speed Dial Destinations (LDAP Search)

E-mail addresses can be registered as speed dial destinations by using infor-
mation on the LDAP server. A maximum of 250 speed dial destinations can
be registered.
To connect to an LDAP server, settings for
specified.
Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with the Setup Utility.
Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from the Setup Utility.
1
In the main screen (Scan mode), press the
, and then press the E
ITY
2
Press the
E key.
NTER
3
Press the
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination, and then press the E
5
Press the
key.
If an LDAP server is not specified,
appear.
6
Press the
E key.
NTER
To search registered names, select
addresses, select
7
Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the E
The search begins, and the search results appear after a while. If no data
matches the search keyword,
onds.
For details on entering/editing text, refer to "Entering Text" on
page A-6.
6-22
NTER
or key to select
or key to select
or key to select
LDAP SEARCH
or key to select
E-MAIL
NTER
LDAP SETTING
or
key.
DIAL REGISTER
, and then press the E
SPEED DIAL
key.
NTER
, and then press the E
LDAP SEARCH
or
NAME E-MAIL
NAME
.
key.
appears for about two sec-
NOT FOUND
Scanning With the Machine
must be
key to select
UTIL-
, and then press the
does not
, and then press the
. To search e-mail
NTER
NTER