Connect Power; Prepare The Remote Control; Set Clock - Philips DCM580 User Manual

Connect power

Caution
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
The type plate is located on the back of the
main unit.
1
Connect the power cord to the
AC~MAINS jack on the main unit.
2
Connect the power plug to the wall
outlet.
10 EN

Prepare the remote control

Caution
Risk of explosion! Keep batteries away from
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
1
Open the battery compartment.
2
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Note
Before you press any function button on the
with the remote control instead of the main
unit.
If you are not going to use the remote control
for a long time, remove the battery.

Set clock

1
In standby mode, press PROG/CLOCK
on the remote control to activate the
clock setting mode.
»
The 12 hour or 24 hour format is
displayed.