Listen To An External Device; Turn On Or Off The Light Effect; Product Information - Philips DCM580 User Manual

Activate and deactivate the alarm
timer
1
Press TIMER repeatedly to activate or
deactivate the timer.
»
If the timer is activated, the display
shows .
»
If the timer is deactivated,
disappears on the display.
Note
If CD/USB/iPhone/iPod source is selected but
the device is not available, tuner is activated
automatically.

Listen to an external device

You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select MP3 link
source.
2
Connect the supplied MP3 link cable to:
the MP3 LINK jack on this unit
the headphone jack on the device
3
Start to play the device. (See the device
user manual).

Turn on or off the light effect

1
In standby mode, press and hold
PRESET + on the main unit for more
than 4 seconds to turn on or off the light
effect.
11 Product
information
Note
Product information is subject to change
without prior notice.
Rated Output 140 W RMS
Power
Frequency 100 Hz - 16 kHz, ±3 dB
Response
Signal to Noise >70dB
Ratio
Aux Input 0.5 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm
Support Disc CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
Audio DAC 24Bits / 44.1kHz
Total Harmonic <1%
Distortion
Frequency 60Hz -16kHz (44.1kHz)
Response
S/N Ratio >65dBA
EN 17