Table of Contents
Advertisement
4. Feature
4-1 PC Control Program
LMT(LED Management Tool)
`
Manual Calibration for Each Module Unit
•
1.
Select the cabinet that need to be calibrated (Mouse
Click)
2.
Select 'LED Signage Cabinet' tab below
3.
Select Calibration button and Enter in.
4.
Calibration Pop up window will be shown.(The currently
calibrated data will be called as the message that reads,
"Fetching data..." appears.)
5.
Check module from M1 ~ M6 that corresponds to the
actual position for each Cabinet
6.
The current setting value of each module can be checked,
if you select a module unit.
7.
The initial value of each item is
Rr, Gg, Bb = 15,000, Others = 0
※ The value for 3x3 matrix and brightness and chromaticity
can be adjusted for each module unit
※ The Maximum of Each Value can be applied up to 16383
Samsung Electronics
r
g
b
r
g
b
LED Display Installation
Hide quick links:
Advertisement
Table of Contents
